There are several ways to compare the D16 and B18 engines. One way is to look at their physical dimensions.
The D16 is a bit longer and wider than the B18. It also has a higher compression ratio, meaning that it can generate more power per unit of displacement. Another way to compare these two engines is to look at their output. The D16 produces slightly less power than the B18, but its torque curve is flatter, meaning that it delivers its power more smoothly and evenly across the rev range.
Finally, we can compare the two engines’ fuel economy. The D16 is more efficient than the B18, thanks in part to its lower compression ratio.
There are a lot of different opinions out there about which engine is better, the D16 or the B18. Both engines have their pros and cons, so it really comes down to what you’re looking for in an engine. If you want more power, then the B18 is probably the better choice.
But if you’re looking for better fuel economy, then the D16 might be a better option. Ultimately, it’s up to you to decide which engine is right for your needs.
D16 and B18 Comparison
Is the D16 Engine Good?
The D16 engine is a great option for those looking for a powerful and reliable engine. This engine offers high power and torque, making it ideal for use in performance applications. The D16 is also relatively light and compact, making it a good choice for use in smaller vehicles.
Additionally, the D16 is known for its durability and reliability, making it a good choice for those who need an engine that will last.
How Much Horsepower Does a B18?
How much horsepower does a B18 have? The B18 engine is a 1.8-liter inline four-cylinder engine that was produced by Honda from 1985 to 2001. It was available in both SOHC and DOHC configurations and was used in a variety of vehicles, including the Honda Accord, Civic, CRX, Integra, and Prelude.
The engine was also used in the Acura Legend and SLX. In its final years of production, the B18 engine was replaced by the more powerful K20 engine. The B18 engine produces between 140 and 170 horsepower depending on its configuration and tuning.
The most powerful version of the engine, the Type R, produces 195 horsepower. This makes it one of the most powerful engines in its class. The B18 is also capable of reaching 0-60 mph in under 7 seconds when properly tuned.
What Do You Need for a B18 Swap?
B18 swaps are becoming increasingly popular as people look for ways to increase the power output of their Honda engines. There are a few things you will need in order to complete the swap, which we will outline below. First and foremost, you will need an engine.
A B18 engine can be sourced from a number of places, including salvage yards or online retailers. You will also need a transmission that is compatible with the B18 engine. The most common transmission to use for this swap is the B-series 5-speed manual, although some people do use the 6-speed manual or even the automatic transmission.
Once you have your engine and transmission, you will need to source a few other parts to complete the swap. These parts include an ECU (Engine Control Unit), wiring harness, clutch kit, mount kit, and header. All of these parts can be sourced from aftermarket suppliers or through salvage yards.
The last thing you will need before starting your B18 swap is a shop manual. This will walk you through all of the steps necessary to complete the swap correctly. Once you have all of your parts and your shop manual, you should be able to complete the swap relatively easily!
Is D16 a Vtec Engine?
The D16 series engines are a group of inline-four internal combustion engines introduced by Honda in the early 1990s. The D16A engine was first used in the 1988 Civic EF9 SiR, and then subsequently used in the CRX del Sol SiR. It is a 1.6 L DOHC engine capable of naturally aspirating to 160 PS at 8000 rpm with an 8.8:1 compression ratio.[1]
In VTEC guise, power output increased to 185 PS at 7600 rpm.[2] Later versions were also produced with a Variable Valve Timing and Lift Electronic Control (VTEC) system, which increased power output to 200 PS in some applications. The D16W7 engine was a 1.6 L DOHC 16-valve Vtec engine found in the 1996–2000 Honda Civic Type R (EK9).[3][4]
This engine made 185 hp @8000rpm from the factory with a rev limiter set at 8400rpm. It had an 8500rpm redline but it is not recommended to go over 8000rpm.[5]
D16 series engines are not VTEC engines. While they may have some features that are similar to VTEC engines, they are not truly VTEC engines.
Credit: www.ebay.com
B18 Engine
The B18 engine is a 1.8-liter inline four-cylinder gasoline engine from Honda. It was introduced in 1985 as the B series engine replaced the earlier CVCC designs, and was used in a variety of Honda models through 1999. The B18A and B18B engines were variants of the original B18, and were available in the US market Accord and Prelude; while the JDM/EDM versions were called the B18C, and came in both DOHC (VTEC) and SOHC configurations.
The most notable change for the 1988 model year was the introduction of Honda’s Variable Valve Timing & Lift Electronic Control (VTEC) system on the DOHC VTEC engines, which greatly enhanced performance. For 1996, all US-market Civics received OBD2 ECUs, which necessitated changes to fuel injectors and intake manifolds among other things. These changes increased power output slightly compared to previous years’ models.
D16 Engine
The D16 engine is a 1.6-liter, inline four-cylinder gasoline engine that was produced by Honda from 1992 to 2000. It was used in a variety of Honda vehicles, including the Civic, CRX, and Integra. The D16 engine was notable for its high power output and fuel efficiency.
The D16 engine was first introduced in the 1992 Honda Civic Si. It featured a cast iron block and aluminum head with double overhead camshafts (DOHC). The D16 engine had a displacement of 1.6 liters and produced 160 horsepower at 7600 rpm and 111 lb-ft of torque at 6000 rpm.
The engine featured Honda’s Variable Valve Timing and Lift Electronic Control (VTEC) system, which increased power output and fuel efficiency. The D16 engine was used in a number of different Honda vehicles over its production run. In addition to the Civic Si, it was used in the 1993-1997 Honda Civic del Sol Si, 1994-2001 Acura Integra GS-R/TYPE R, 1995-1998 Honda CRX Si/Del Sol VTEC, and 1999-2000 Honda Civic SiR II/SiR-G.
All of these vehicles were performance models that benefited from the D16’s high power output and fuel efficiency. The D16 engine is no longer in production, but it remains a popular choice for tuners and enthusiasts looking to increase the performance of their Honda vehicle. Thanks to its robust design and plentiful aftermarket support, the D16 is still considered one of the best engines ever produced by Honda.
D16Z6 Engine
The D16Z6 engine is a 1.6-liter, four-cylinder engine that was produced by Honda from 1992 to 1995. It was used in a variety of Honda vehicles, including the Civic, Accord, and Prelude. The engine was notable for its high power output and fuel efficiency.
The D16Z6 engine featured a cast iron block and aluminum head. It had a bore and stroke of 81mm x 77mm, and it displaced 1.6 liters. The compression ratio was 9:1.
The engine used Honda’s VTEC system, which allowed for two different cam profiles to be used at different rpm ranges. This helped to improve both power and fuel economy. The D16Z6 engine made 128 horsepower at 6,200 rpm and 106 lb-ft of torque at 5,000 rpm when it was first introduced in 1992.
For the 1994 model year, power was increased to 135 horsepower at 6,200 rpm and 107 lb-ft of torque at 5,000 rpm. Fuel economy was also impressive, with the D16Z6 achieving up to 30 mpg in highway driving conditions. Overall, the D16Z6 engine was a highly successful design that provided good power and fuel economy in a small package.
Conclusion
The D16 engine is a 4-cylinder engine that was produced by Honda. It was first introduced in 1985 and was used in a variety of Honda vehicles over the years. The D16 is known for its high power output and reliability.
However, it can also be quite thirsty when it comes to fuel consumption. The B18 engine is also a 4-cylinder engine, but it was produced by Mitsubishi. It made its debut in 1988 and was used in a number of different Mitsubishi models throughout the years.
The B18 is known for being very efficient when it comes to fuel consumption. However, it doesn’t pack as much power as the D16 does.
