If you overtighten an axle nut, it can cause the threads to strip. This will make it difficult to remove the nut and could damage the axle. If the axle is damaged, it may need to be replaced.

If you overtighten an axle nut, it can cause damage to the threads and make it difficult to remove the nut in the future. It can also cause the bearings to fail prematurely.

Cv axle, hub bearing failure… never over tighten the cv axle nut

What Happens If the Axle Nut is too Tight?

If the axle nut is too tight, it can cause problems with the wheel bearings. The bearings may become damaged or worn out prematurely if the nut is not properly lubricated. Additionally, the excessive friction from a too-tight axle nut can overheat the bearings and cause them to fail.

How Tight Should Axle Nuts Be?

Most axle nuts should be tightened to between 80-100 ft-lbs of torque. Some vehicles may require more or less torque, so it is always best to consult your vehicle’s owner manual for the specific torque rating. Over-tightening axle nuts can damage the threads and cause problems down the road, so it is important not to go overboard.

Can You Over-Tighten Wheel Hub Nut?

If you’re asking if it’s possible to over-tighten a wheel hub nut, then the answer is yes. It’s possible to damage the threads on the stud or to break the stud entirely if you apply too much force when tightening the nut. That said, it’s not easy to over-tighten a wheel hub nut since most lug nuts require at least 80 ft-lbs (108 Nm) of torque to properly secure the wheel.

How Much Torque Does an Axle Nut Need?

An axle nut needs to be torqued to 80-100 ft-lbs.

What Happens If You Over Tighten Axle Nut

Credit: www.tomorrowstechnician.com

Symptoms of Over Tightened Wheel Bearing

If your vehicle is making a grinding noise or if the steering wheel feels loose, it may be due to an over-tightened wheel bearing. Symptoms of an over-tightened wheel bearing include: -Grinding noise coming from the wheels

-Steering wheel feels loose -Vehicle vibrates when in motion -Excessive wear on tires

If you suspect that your vehicle has an over-tightened wheel bearing, it’s important to have it checked out by a mechanic as soon as possible. An over-tightened wheel bearing can cause serious damage to your vehicle if left untreated.


If you over-tighten an axle nut, it can cause the CV joint to fail. The CV joint is what allows the wheels to turn while the vehicle is moving. If it fails, the wheels will no longer be able to turn and the vehicle will not be able to move.

Read also: Aluminum Vs Steel Lug Nuts

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *